If your furnace has not been keeping your indoor space warm like before, you need to troubleshoot for Payne furnace problems. Some of the common Payne furnace problems that you may encounter every once in a while include:
Payne Furnace Not Igniting
There are many reasons your Payne furnace is not igniting. One of the most straightforward explanations is that your thermostat has not been adequately set or just simply broken.
Naturally, when you change the setting to a higher level, your furnace should ignite. You’ll then hear its fan and a swooshing sound, which marks the beginning of the burning process.
Your dust-covered air filters may also cause this problem. Your furnace won’t ignite if the air is not flowing optimally, as this prevents your heating system from producing the necessary gas or air mixture.
Another cause is that your Payne furnace’s ignition is not working if it’s the old pilot light or the newer electric furnace ignition.
It’s best to get in touch with your local HVAC installation or repair company to fix this problem. You wouldn’t want to fix your Payne furnace yourself, especially if you don’t have the proper knowledge and skills to do so.
Payne Furnace Blowing Cold Air
A Payne furnace blowing cold air defeats its purpose. As it appears, dirty air filters can affect your Payne furnace in many ways. The built-up dirt stops air from flowing over the furnace’s heat exchanger, causing it to overheat and eventually shut off.
The quick fix here is to check whether your furnace filter is clogged. Before doing so, remember to turn off your furnace using the thermostat.
Payne Furnace Leaking Water
The reason your Payne furnace is leaking may be due to leaks in your condensation drain. In this case, you need to check the condensation drain or tubing of your furnace. If it is clogged, you may need to call an HVAC professional to help you fix the problem.
Payne Furnace is Not Heating
It would be best if you were alarmed when your Payne furnace is not heating as this is its sole purpose. Check if your thermostat is turned on and set to heat. If they are, try resetting your circuit breaker. Also, make sure that your filter is not clogged, as this can prevent heat production.
Payne Furnace Keeps Shutting Off
Another common issue is when the Payne furnace keeps shutting off. This may be because of inadequate airflow in the furnace. Check the air filter and replace it if it is broken.
Payne Furnace Flash Codes
If you want to troubleshoot the problems, make sure that you check the Payne furnace flash codes to help you comprehend the issue.